Real-Time Potentiometric Monitoring of Tetrachloroaurate(III) with an Ion-Selective Electrode and Its Applications to HAuCl 4 Iodide-Catalyzed Reduction by Hydroxylamine.

Ion-selective electrodes for tetrachloroaurate(III) have been developed for potentiometric monitoring of the reduction reaction of tetrachloroaurate(III). Three different plasticized polyvinyl chloride membranes containing tridodecymethylammonium chloride as an anion exchanger were investigated. These membranes differ in the plasticizer used, either 2-nitrophenyl octyl ether (NPOE) or tricresyl phosphate (TCP) or bis-(2-ethylhexyl) sebacate (DOS). The potentiometric response of the electrodes to the tetrachloroaurate(III) concentration was studied by two methods. In the first method, commonly used in the calibration of ion-selective electrodes, successive tetrachloroaurate(III) concentration increments were used and the potential was allowed to stabilize after each concentration step. The second method was developed to mimic the tetrachloroaurate(III) reduction reaction in which there is a continuous decrease in the concentration of tetrachloroaurate(III). This was achieved by continuously diluting an initial concentration of tetrachloroaurate(III) by pumping a diluent solution while keeping the sample volume constant. This method gave an excellent linear response to the tetrachloroaurate(III) concentration. The calibrated electrodes were used for the potentiometric monitoring of the kinetics of a newly observed reaction: the reduction of tetrachloroaurate(III) by hydroxylamine catalyzed by iodide. A mechanism for this reaction is proposed on the basis of the experimental results obtained. [ABSTRACT FROM AUTHOR]