Assessing the suitability of fused deposition modeling to produce acrylic removable denture bases.

Objective: To study the feasibility of using poly methyl methacrylate (PMMA) filament and fused deposition modeling (FDM) to manufacture denture bases via the development of a study that considers both conventional and additive‐based manufacturing techniques. Materials and Methods: Five sample groups were compared: heat and cold cured acrylic resins, CAD/CAM milled PMMA, 3D‐printed PMMA (via FDM), and 3D‐printed methacrylate resin (via stereolithography, SLA). All groups were subjected to mechanical testing (flexural strength, impact strength, and hardness), water sorption and solubility tests, a tooth bonding test, microbiological assessment, and accuracy of fit measurements. The performance of sample groups was referred to ISO 20795‐1 and ISO/TS 19736. The data was analyzed using one‐way ANOVA. Results: Samples manufactured using FDM performed within ISO specifications for mechanical testing, water sorption, and solubility tests. However, the FDM group failed to achieve the ISO requirements for the tooth bonding test. FDM samples presented a rough surface finish which could ultimately encourage an undesirable high level of microbial adhesion. For accuracy of fit, FDM samples showed a lower degree of accuracy than existing materials. Conclusions: Although FDM samples were a cost‐effective option and were able to be quickly manufactured in a reproducible manner, the results demonstrated that current recommended testing regimes for conventionally manufactured denture‐based polymers are not directly applicable to additive‐manufactured denture base polymers. Therefore, new standards should be developed to ensure the correct implementation of additive manufacturing techniques within denture‐based fabrication workflow. [ABSTRACT FROM AUTHOR]