Estimating Increased Transient Water Storage with Increases in Beaver Dam Activity.

Dam building by beaver (Castor spp.) slows water movement through montane valleys, increasing transient water storage and the diversity of residence times. In some cases, water storage created by beaver dam construction is correlated to changes in streamflow magnitude and timing. However, the total amount of additional surface and groundwater storage that beaver dams may create (and, thus, their maximum potential impact on streamflow) has not been contextualized in the water balance of larger river basins. We estimate the potential transient water storage increases that could be created at 5, 25, 50, and 100% of maximum modeled beaver dam capacity in the Bear River basin, USA, by adapting the height above nearest drainage (HAND) algorithm to spatially estimate surface water storage. Surface water storage estimates were combined with the MODFLOW groundwater model to estimate potential increases in groundwater storage throughout the basin. We tested four scenarios to estimate potential transient water storage increases resulting from the construction of 1179 to 34,897 beaver dams, and estimated surface water storage to range from 57.5 to 72.8 m³ per dam and groundwater storage to range from 182.2 to 313.3 m³ per dam. Overall, we estimate that beaver dam construction could increase transient water storage by up to 10.38 million m³ in the Bear River basin. We further contextualize beaver dam-related water storage increases with streamflow, reservoir, and snowpack volumes. [ABSTRACT FROM AUTHOR]