Advances in making Mn oxide‐coated sands.

Manganese (Mn) oxide‐coated sand has been suggested as an amendment for scrubbing metals in water filtration beds and also as a less concentrated medium for uniformly amending soils with Mn oxides in mesocosm scale studies. Earlier work at the lab bench scale, using potassium permanganate (KMnO4) solutions that were reduced with sodium (Na) lactate, resulted in sands coated with about 0.13% Mn. The goal of this project was to increase the amount of Mn oxide that could be coated on sand to make it a more useful amendment and also to attempt to scale up the procedure to produce larger (kg) quantities of coated sand. Titration experiments examined the effects of (1) varying the molar ratio of Na lactate to KMnO4, (2) varying the rate at which the titration was accomplished, and (3) varying the concentration (molarity) of the original KMnO4 solution. The results of this work led to an optimal approach utilizing 0.32 M KMnO4 solution that was titrated to a final lactate:permanganate ratio of ∼1.1 with 10% of the lactate being added every 10 min while the suspension was being stirred. The proportion of sand to an initial solution was also increased 5–20 fold to between 50 and 200 g per 100 mL of solution. Applying this method and using a large 20‐ to 30‐L reaction vessel yields sands coated with up to 0.7% Mn in batches 5–10 kg is size, which could be useful as an amendment in mesocosm scale studies, or as a component of treatment filter beds. The examination of various size fractions of the coated sands demonstrated that more Mn was coated on finer sand fractions, which appears to be a function of the particle surface area available for the coating of Mn oxides, and at a rate of 0.3–0.5 µg Mn mm−2 of the particle surface. Core Ideas: Manganese (Mn) oxide‐coated sands (MCS) can be synthesized with much higher Mn content (up to 0.5%–0.7% Mn).MSC can be produced in large batches (up to 5–10 kg).Scaled‐up production of MCS makes it feasible for use as an amendment or in treatment filter beds.As the Mn coating increases (up to 0.2% Mn), sand colors become progressively darker (lower Munsell value).A digital colorimeter (using Munsell value) can be used to accurately estimate % Mn oxide at levels <0.2%. [ABSTRACT FROM AUTHOR]