The Influence of Sodium Hexametaphosphate Chain Length on the Physicochemical Properties of High-Milk Protein Dispersions †.

Protein–protein and protein–mineral interactions can result in defects, such as sedimentation and age gelation, during the storage of high-protein beverages. It is well known that age gelation can be delayed by adding cyclic polyphosphates such as sodium hexametaphosphate (SHMP). This study aims to assess the influence of different phosphate chain lengths of SHMP on the physicochemical properties of high-protein dispersions. The effect of adding different SHMP concentrations at 0%, 0.15%, and 0.25% (w/w) before and after heating of 6%, 8%, and 10% (w/w) milk protein concentrate dispersions was studied. The phosphate chain lengths of SHMPs used in this study were 16.47, 13.31, and 9.88, and they were classified as long-, medium-, and short-chain SHMPs, respectively. Apparent viscosity, particle size, heat coagulation time (HCT), color, and turbidity were evaluated. It was observed that the addition of SHMP (0.15% and 0.25%) increased the apparent viscosity of MPC dispersions. However, the chain length and the concentration of the added SHMP had no significant (p > 0.05) effect on the apparent viscosity after heating the dispersions. The HCT of a dispersion containing 6%, 8%, and 10% protein with no SHMP added was 15.28, 15.61, and 11.35 min, respectively. The addition of SHMP at both levels (0.15% and 0.25%) significantly increased the HCT. Protein dispersions (6%, 8%, and 10%) containing 0.25% short-chain SHMP had the highest HCT at 19.29, 19.61, and 16.09 min, respectively. Therefore, the chain length and concentration of added SHMP significantly affected the HCT of unheated protein dispersion (p < 0.05). [ABSTRACT FROM AUTHOR]