Analysis of the Effectiveness of the Application of Corrosion Inhibitors to Steel Re-Bars Embedded in Concrete.

Reinforced concrete is the most widely used material in the construction of building structures, being noted for its versatility and low cost. However, the durability of reinforced concrete structures can be compromised by the corrosion of steel re-bars, especially in the presence of chlorides. To address this challenge and promote sustainability, the use of corrosion inhibitors has been researched as a way to extend the lifespan of structures. This study assessed the effectiveness of using a commercial corrosion inhibitor on steel re-bars embedded in types of concrete with different chloride percentages, using electrochemical methods to measure the corrosion rate and potential. The results indicate that, in the absence of corrosion inhibitors, corrosion rates become unacceptable with chloride percentages equal to or higher than 0.8% by weight of cement. The application of inhibitors significantly reduced the corrosion rate, particularly at chloride percentages of 0.8% and 1.2%, maintaining the re-bars in a passive state or at moderate levels of corrosion. However, for chloride percentages higher than 1.6%, high levels of corrosion were observed, even in the presence of inhibitors. The findings suggest that the use of inhibitors can be an effective strategy in preventing corrosion in reinforced concrete structures, contributing to their structural integrity and long-term sustainability. [ABSTRACT FROM AUTHOR]