Sinking ECDM micro-milling of micro-channels with a customized electrode.

Electrochemical discharge machining (ECDM) micro-milling exhibits enormous machining potential in manufacturing metal microstructures. In this paper, a novel sinking ECDM micro-milling using glycol-based electrolyte is proposed for the high-quality fabrication of metal micro-channel structures. Firstly, a novel combined process is developed for the simple and efficient preparation of micro-electrode. With the proposed method, a micro-electrode with 91.1 μm in diameter and 21.2:1 in aspect ratio is successfully machined in 47.2 minutes. Secondly, experimental research on ECDM micro-milling machining of micro-channels in glycol-based electrolyte is carried out using the fabricated micro-electrode. Experimental results show that the machined voltage significantly affects the machining quality of micro-channels. Wear analysis reveals that the bottom geometry of the micro-electrode exhibits equal wear along the axis direction with processing times increasing, and a constant length compensation strategy (1.52 μm/mm) is adopted. Finally, an S-shaped micro-channel without recast layers (Ra 0.093 μm) was successfully fabricated. [ABSTRACT FROM AUTHOR]