Effect of annealing on the morphology and properties of poly(lactic acid)/polyhedral oligomeric silsesquioxane asymmetric porous membranes prepared through non‐solvent induced phase separation and its application.

Non‐solvent induced phase separation (NIPS) method was employed to fabricate biodegradable poly(lactic acid) (PLA) nanocomposite membranes. Morphological studies using scanning electron microscopy revealed that all the membranes prepared display asymmetric structures comprising finger‐like macropores. The incorporation of modified polyhedral oligomeric silsesquioxane (POSS) particles into the PLA matrix resulted in enhanced crystallinity, mechanical, and thermal properties. Annealing of the membranes was performed to explore the influence of temperature on the morphology and properties. After annealing, membranes become more thin and compact, and drastic enhancement in crystallinity is also observed. Consequently, Young's modulus experiences a significant improvement. The reduction in oil absorption capacity after annealing can be attributed to the higher level of crystallinity, reduced porosity, and smaller pore diameter observed in the annealed membranes. Additionally, the unannealed PLA nanocomposite membranes demonstrated exceptional oil absorption capacity, reaching approximately 88%. It is foreseeable that these PLA/POSS nanocomposite membranes possess the potential to be utilized as effective tools for oil–water separation, offering the advantage of mitigating secondary pollution. [ABSTRACT FROM AUTHOR]