Fabrication and characterization of bioresorbable radiopaque PLLA/PCL/Mg alloy composite tubes for cardiovascular stent application.

All bioresorbable polymeric implants are radiolucent, making them undetectable under the X-rays. Therefore, to improve their X-ray visibility, the high effective atomic number (Z_eff) material such as Pt, Au, Ta, Ba, or its alloy are attached to the body of the bioresorbable implant. However, during the in vivo degradation, these bio-inert heavy metals can either detach or leach out from the lesion site and accumulate into the vital organ, leading to severe health complications. Thus, as a strategy, the novel biodegradable and radiopaque Mg alloy was produced to impart X-ray visibility in the biopolymer. Here, the Mg was alloyed with the optimized ratio of heavy metals, i.e., Zn and Y. The radiopaque Mg alloy was characterized and powdered to the size of 25–20 µm. Further, it was blended with radiolucent Poly-L-lactic acid (PLLA) and polycaprolactone (PCL) polymer. The Bi-axially expanded (BAE) tubes of PLLA/PCL and PLLA/PCL/Mg alloy (5% wt.) were extruded for fabricating cardiovascular stents. The BAE tube comparison studies were performed for thermal stability, wettability, surface roughness, and mechanical properties. The potential of 5% Mg alloy in the polymeric matrix was evaluated as a nucleating, reinforcing, and radiopaque agent. In vitro accelerated degradation study was performed in the physiological fluid to evaluate the pH variation and decomposition rate. Finally, in vitro biocompatibility was assessed by evaluating the behavior of L929 fibroblast cells, followed by the blood biocompatibility test on the blends. [ABSTRACT FROM AUTHOR]