Dynamic Response Mechanism of Thin-Walled Plate under Confined and Unconfined Blast Loads.

Thin-walled metal plates and cabin structures are widely found in ships and cargos which are susceptible to attacks or accidental explosions. The present work focuses on the dynamic response mechanism of steel plates under unconfined and confined blast loads. In the experiment, digital image correlation (DIC) technique was applied to record and analyze the dynamic response process of a large-scale field blast test. The DIC measured curve and the numerically calculated curves agree well in both trends and peak values. Then, the dynamic response mechanisms of steel plates under an unconfined blast (UB) load and confined blast (CB) load were compared and discussed. The results show that the dynamic response of plates can be divided into three phases under both UB and CB loads, with different mechanisms. In phase I, plastic hinges start from the center and move to the boundary in the UB condition, while in the case of CB, plastic hinges occur close to the boundary and move in the opposite direction. In phase II, two plastic hinge lines propagate towards each other, a platform exists between the boundary, and the central area remains undeformed in the UB condition, while in the CB condition, larger deformation occurs in the peripheral region rather than the central area. [ABSTRACT FROM AUTHOR]