Fabrication of Air Conditioning Antimicrobial Filter for Electrically Powered Port Tractors via Electrospinning Coating.

With the stricter emission regulations for internal combustion engines, electric vehicles, including electrically powered port tractors, have received increasing attention. However, currently, most of the filters used in electric vehicles are conventional membranes that only have the function of filtering particles and foreign objects. Therefore, in order to improve the above issues, the surface of commercial non-woven filter membranes was coated with Ag nanopowder nanofibers and AgNO₃ nanofibers via electrospinning. At present, the comparative research on the antibacterial ability of Ag nanopowder and AgNO₃ is still blank in the same research system, especially with the use of electrospun coating technology. The morphologies and structures of non-woven fabrics and electrospinning coated samples were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). The characterization results indicate that both pure PVA and PVA composite fibers can be successfully coated on the surface of non-woven fabrics. The average diameter of all electrospun PVA composite fibers is distributed in the range of 470–700 nm. The PVA nanofibers with a low content of 1 wt% AgNO₃ have good antibacterial properties against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), with clearance clear zones of inhibition of 26.00 mm and 17.30 mm, respectively. [ABSTRACT FROM AUTHOR]