Investigations of Flow Boiling in Mini-Channels: Heat Transfer Calculations with Temperature Uncertainty Analyses.

The article aims to explore boiling heat transfer in mini-channels with a rectangular cross-section using various fluids (HFE-649, HFE-7000, HFE-7100, and HFE-7200). Temperature measurements were conducted using infrared thermography for the heated wall and K-type thermocouples for the working fluid. The 2D mathematical model for heat transfer in the test section was proposed. Local heat transfer coefficients between the heated wall and the working fluid were determined from the Robin condition. The problem was solved by means of the finite element method (FEM) with Trefftz functions. The values of the heat transfer coefficient that were obtained were compared with the results calculated from Newton's law of cooling. The average relative differences between the obtained results did not exceed 4%. The study included uncertainty analyses for temperature measurements with K- and T-type thermocouples. Expanded uncertainties were calculated using the uncertainty propagation and Monte Carlo methods. Precisely determining the uncertainties in contact temperature measurements is crucial to ensure accurate temperature data for subsequent heat transfer calculations. The results of the heat transfer investigations were compared in terms of fluid temperature, heat transfer coefficients, and boiling curves. HFE-7200 consistently exhibited the highest fluid temperature and temperature differences at boiling incipience, while HFE-7000 demonstrated the highest heat transfer coefficients. HFE-649 showed the lowest heat transfer coefficients. The boiling curves exhibited a typical shape, with a notable occurrence of 'nucleation hysteresis phenomena'. Upon the analysis of two-phase flow patterns, bubbly and bubbly-slug structures were observed. [ABSTRACT FROM AUTHOR]