Transmission of vertical vibration through a seat cushion at the seat pan: Effect of foam physical properties during different excitation magnitudes.

The vibration characteristics of car seats directly influence the ride comfort. Polyurethane foam is the key part of a seat, and its physical parameters have an important impact on the seat. In this study, the influence of the foam thickness and foam hardness on the vibration characteristics of seat cushion with different excitation magnitudes was investigated by using transmissibility and seat effective amplitude transmissibility (SEAT) value. First, vibration tests were carried out at a vertical vibration simulator with width-limited white noise vibration frequencies from 0.5 to 20 Hz with root-mean-square (r.m.s.) values of 0.4, 0.8, and 1.2 m/s², the acceleration at the platform and the body-foam interfaces were measured to calculate the transmissibility, and the influence of the foam physical properties on the transmissibility was analyzed. Then, the SEAT value was introduced to assess the vibration isolation efficiency of the foam cushion, and the influence of the foam physical properties of the foam cushion on the vibration isolation efficiency was analyzed. With increasing thickness of the foam and decreasing hardness of the foam at the seat pan, the peak transmissibility increased and the resonance frequency decreased. The SEAT values show that increasing the foam thickness is beneficial to the improvement of the vibration isolation efficiency of the seat, but there is a diminishing return; the combination of physical parameters of low hardness and high thickness could make the vibration isolation performance of the seat better. In addition, the nonlinearity of human-seat system during different vibration magnitude was found. [ABSTRACT FROM AUTHOR]