A viscoelastic–viscoplastic modeling approach for amorphous polymers in vacuum forming simulation.

In this study, the simulation of a vacuum forming process employing a micromechanical inspired viscoelastic–viscoplastic model is investigated. In the vacuum forming process, a plastic sheet is heated above the glass transition temperature and subsequently forced into a mold by applying a vacuum. The model consists of a generalized Maxwell model combined with an dissipative element in series. Each Maxwell element incorporates a hyperelastic element in series with a viscous element based on a hyperbolical law. While the generalized Maxwell model considers the relaxation due to molecular alignment, the additional viscous element is a modification based on the approach of Bergström and thus considers molecular chain reptation. The model is designed with the aim to converge to the generalized linear Maxwell model in the limit of small deformation. Furthermore, the viscous modeling is temperature activated and follows the Williams–Landel–Ferry approach in the limit of linear viscoelasticity. To simulate rheological standard experiments, a physical‐network‐based implementation into Simscape is presented. To validate the performance of the model in thermoforming, it is implemented into Fortran programming language for finite element simulation with Abaqus/Explicit. It can be shown that the simulation is able to predict the thickness in high correlation with experimental results. [ABSTRACT FROM AUTHOR]