NUMERICAL SIMULATION ANALYSIS OF ROCK BREAKING OF CUTTING PART OF ROADHEADER WITH A TRANSVERSE HEAD UNDER DIFFERENT DESIGN PARAMETERS.

In order to analyze the impact angle of pick cutter, the angle of alloy head and the cutting line spacing on rock breaking effect, the three-dimensional model of rock cutting by pick cutter was established by solidworks, and the three-dimensional finite element model of rock breaking by pick cutter based on penetration failure and compression damage was established by using dynamic simulation software ANSYS/LS-DYNA. For the drum with a diameter of 1200 mm, a length of 900 mm and a rotational speed of 30 rot/min, when the impact angles of the picks are 30°, 37°, 45° and 52°, the angles of the alloy heads are 70°, 80°, 90° and 100°, and the intercept distances are 250 mm, 275 mm, 300 mm and 325 mm, the rock breaking simulation based on the finite element analysis software is carried out, and the load and specific energy consumption of the drum are obtained. Finally, through the analysis and comparison, the existing parameters are optimized, and a better parameter model is obtained. [ABSTRACT FROM AUTHOR]