Spray-coating of graphene nanoplatelets on sisal fibers and its influence on electromechanical behavior of biocomposite laminates.

Spray coating and vacuum-assisted resin infusion processes were implemented in this work to develop multifunctional biocomposite laminates. The biocomposites were fabricated using a bio-based epoxy resin reinforced with natural sisal fibers coated with graphene nanoplatelets (GNPs). A systematic characterization of material properties was performed to evaluate the mechanical, thermomechanical, electrical, and piezoresistive behavior of biocomposites with different GNPs contents (0, 1, 4, 6, and 8 wt.%). The mechanical tests revealed that adding GNPs to biocomposites has a slight positive effect on their flexural properties compared to the neat biocomposites (without GNPs). The electrical and thermomechanical tests showed that the electrical conductivity and glass transition temperature of biocomposites containing GNPs were enhanced significantly, achieving average values of 5.19 x 10^-4 S/m and 63.29°C (26%), respectively. Regarding electromechanical tests, the biocomposites with 8 wt.% GNPs exhibited an excellent piezoresistive behavior under monotonic loading conditions, achieving a gage factor (strain sensitivity) of 3.56. Bending tests with cyclic loading were also performed, and cyclic reproducibility of the piezoresistive response of the biocomposites after 10 cycles was demonstrated, evidencing that the incorporation of GNPs onto sisal fibers by spray-coating produces an effective formation of conductive networks into biocomposites suitable for sensing applications. [ABSTRACT FROM AUTHOR]