Eutectic phase transition during tablet manufacture: effect of melting point of eutectic forming drug.

The aim was to investigate eutectic transition during tableting and storage. Mixtures of lidocaine and series of NSAIDs with increasing melting point were used as model systems to guide formulators to scaleup eutectic forming materials gaining enhanced dissolution while avoiding deleterious physical changes. Physical mixtures of NSAIDs with lidocaine were prepared at eutectic forming ratio. These were directly compressed, dry co-ground before compression, or compressed after wet granulation. Dissolution of tablets was compared to corresponding dry co-ground mixture. Thermograms of direct compressed tablet were compared to co-ground mixture and pure compound. Stability of direct compressed tablets was assessed. Tableting initiated eutexia which enhanced dissolution of NSAIDs. Eutexia was associated with tablet softening in case of low melting point ketoprofen and aceclofenac. Wet granulation hastened eutexia developing unacceptable tablet in case ketoprofen and aceclofenac. Tablets prepared by direct compression of physical mixtures underwent gradual eutectic transition upon storage with the magnitude of eutectic transition reducing with increased melting point of NSAIDs. Ketoprofen was physically unstable but aceclofenac degraded chemically as well. Tenoxicam and meloxicam tablets were physically and chemically stable. Direct compression after physical mixing is the best tableting technique, but low melting point drugs should consider different strategy before compression. [ABSTRACT FROM AUTHOR]