Solution Blow Spinning to Prepare Preferred Oriented Poly(ethylene oxide) Submicrometric Fibers.

In this work, materials with potential biomedical applications constituted by fibrous poly(ethylene oxide), PEO, are prepared by solution blow spinning (SBS). The SBS setup has a cylindrical collector for which the rotational speed and size are varied to study its effect on the final morphology of the materials. The morphology is inspected using field emission scanning electron microscopy and studied using image analysis. As a result, many doubts were generated because of the use of different methods of image analysis, therefore a simpler and more conventional method using Image J open-source software was used to ensure the accuracy of the final interpretation. It is shown that fiber size and orientation depend on the linear speed associated with the surface of the collector more than on its rotational speed; therefore, it can be said that the morphology of materials prepared by SBS will depend on the size, shape, and rotational speed of the collector. When the linear speed of the cylindrical collector increases, fibers get thinner, less entangled, and more oriented. It is clear, therefore, that the linear speed of material collection by solution blow spinning is a very important parameter of processing to control the final morphology of materials manufactured by that method. Since morphology can affect the final properties of the materials the simple variation of the linear speed might have important implications on their final performance for different biomedical applications. [ABSTRACT FROM AUTHOR]