Particle Size Distribution and Composition of Soil Sample Analysis in a Single Pumping Well Using a Scanning Electron Microscope Coupled with an Energy Dispersive X-ray (SEM-EDX) and the Laser Diffraction Method (LDM).

Soil is a heterogeneous material, and its properties are vital from an agricultural perspective and for groundwater management. However, limited studies have been performed on the soil characteristics (soil texture, water-holding capacity, and soil compositions) of a single pumping well, especially in Malaysia. This article focuses on the soil characteristics and elemental analysis of a single borehole with 11 samples collected around Labu Kubong, Perak. The soil properties were analyzed in the context of particle size distribution (PSD) using the laser diffraction method (LDM), as well as soil composition for elemental analysis using a scanning electron microscope coupled with an energy dispersive X-ray (SEM-EDX). The LDM results revealed the average percentage of clay, silt, and sand to be 0%, 6%, and 94%, respectively, indicating most particles comprised sand particles which in percentages demonstrated a sandy texture with less silt content. Additionally, the water holding capacity is low because of major coarse sand particles in alluvial formations. Moreover, SEM-EDX outcomes displayed an average percentage of elemental composition reported as follows: C (40.77%), O (34.33%), Si (10.66%), Al (5.82%), Fe (1.10%), K (1.10%), As (0.05%), Na (0.04%), and Be (5.62%). Consequently, SEM-EDX outcomes showed these elements were derived from silicified quartz, feldspar, and iron-bearing minerals that originated from shale formations, and the presence of carbon indicates peat formation. Therefore, this study provides information on a single pumping well from an irrigation practice, and this study also recommends regional to global scale studies for supporting sustainable groundwater development worldwide. [ABSTRACT FROM AUTHOR]