Thermal Stress Compensation for an Aircraft Engine Duct System Based on a Structural Redesign of Tie Rods.

The reliability of the aircraft engine duct system is of paramount importance as it directly affects the safety of the aircraft, particularly under high-temperature and high-pressure cycles. In this study, ANSYS Workbench was used for finite element analysis, and a sleeve-type tie rod structure was proposed to address the critical problem of tie rod tearing during the operation of the duct system, thereby optimizing thermal stress compensation for the duct system. The research results show the following: (1) The anchor of the traditional tie rod imposes displacement constraints on the thermal deformation of the duct system, leading to stress concentration and even structural failure in the connection area between a duct and a tie rod. (2) The improved sleeve-type tie rod provides greater axial displacement freedom for the duct, effectively mitigating stress concentration phenomena. (3) Taking a worst-case scenario of 537.78 °C and 2 MPa as an example, the sleeve-type tie rod proposed in this paper can reduce the stress at the tie rod connection from 757.61 MPa to less than 25 MPa, a reduction of more than 96%. The original tie rod tearing problem is solved, and the maximum stress of the whole duct system is reduced to 459.25 MPa, which is below the yield strength. [ABSTRACT FROM AUTHOR]