Effect of calcium hydroxide on pasting, thermal, and water‐adsorption behavior, and the flow properties of nixtamalized corn flour.

Nixtamalized corn flour (NCF) has gained favor worldwide due to the growing popularity of Mexican cuisine. This research evaluates the effect of the amount of calcium hydroxide (Ca(OH)2) employed during the nixtamalization on the water‐adsorption, thermodynamic, and flow properties of NCF. In addition, NCF pasting and thermal properties were evaluated to relate bulk‐powder properties to wet‐dispersion conditions. Ca(OH)2 amounts of 1.5 and 2.0% induced higher ash and calcium content as well as lower fat and protein content. Also, pasting properties and gelatinization enthalpy (ΔHgel) values, in addition to yellowish NCF, were related to Ca(OH)2 concentration. With the independence of the Ca(OH)2 amounts employed, no important differences in the equilibrium's moisture content, as well as a negligible effect of temperature on adsorption behavior, were observed. For prepared NCF, the moisture content corresponding to minimum integral entropy was not observed within the range of the aw analyzed; thus, GAB parameters are more reliable for suggesting the storage conditions. NCF with a low amount of Ca(OH)2 exhibited higher values of mean caking strength (≈1.81 N) and cohesiveness index (≈13.99 × 10−5 N m g−1), in addition to higher resistance to flow. Therefore, the amount of Ca(OH)2 positively influenced flow properties, whereas wet‐dispersion properties such as lower maximal peak viscosity and ΔHgel values were obtained. Practical applications: This study contributes useful information to the manufacturers of NCF concerning the amount of Ca(OH)2 needed to obtain NCF with desirable physical properties while attempting to affect thermal and pasting properties to a lesser extent. In addition, this study characterizes and provides the adequate amount of Ca(OH)2 employed the during the nixtamalization process to improve the flowability of NCF in industry during handling. Finally, the absence of a moisture content corresponding to minimum integral‐adsorption entropy provides clarification for NCF producers regarding the long‐term storage stability of NCF. [ABSTRACT FROM AUTHOR]