Development of green‐colour‐emitting pyrotechnics as a core for 3D temperature imaging sensors inside coal boilers.

Efficiency in the control operation of the boilers for coal and coal with biomass can be further improved if the flue gas temperature distribution can be better characterized. This is very difficult in these harsh environmental systems, where spatially resolved measurements are nearly impossible with solid‐state sensors. In this work, we evaluate the development of pyrotechnic compounds that would serve as the basis for a novel optical mapping of the temperature inside coal boilers. For this purpose, various green‐colour‐emitting pyrotechnics using BaCl2 · 2H2O and Ba(NO3)2 as the green light source were prepared, as this colour offers a distinct signal from the combustion‐based background in the boiler. These pyrotechnics were characterized using thermogravimetric analysis (TGA) and X‐ray diffraction (XRD) and tested using a flat‐flame burner. Furthermore, the composition was varied to evaluate the effect of different metal fuels such as Sn, Co, and Mg, as well as various binders such as ethylcellulose, shellac, parlon, and PVC on green light emission. The emission intensity and the apparent ignition temperature were strongly dependent on the metal type, with Mg showing higher intensities. On the other hand, the effect of the binder showed that the ignition behaviour, emission intensity, and spectral purity were influenced by the nature and exothermicity of the binder. The addition of other potential green light‐producing materials, such as boric acid, increased the intensity of emission by 17% for a BaCl2 · 2H2O‐based composition. This study identified prospective compositions with intense and bright green‐colour emissions that have high spectral purities. [ABSTRACT FROM AUTHOR]