Development of Bidirectional Pulsed Power Supply and Its Effect on Copper Plating Effect of Printed Circuit Board Via-Filling.

A bidirectional pulse power supply with continuously adjustable forward parameters 8 V/20 A and reverse parameters 20 V/50 A was designed using DSP (Digital Signal Processor), and the bidirectional pulse power supply was used to test copper plating on printed circuit boards with filled via holes. The effects of frequencies, pulse width ratios of forward and reverse currents, and current densities on the copper plating effect were investigated by the single variable method and were compared with DC copper plating. The experimental results showed that compared with DC power supply, the bidirectional pulse power supply had a better effect and a faster speed on via-filling copper plating, and can also reduce the use of additives, which is in line with green development. The parameters of the pulse affected the plating effect to varying degrees. In this solution system, the optimal parameters for bidirectional pulse plating are frequency 1 kHz, forward pulse current density 4 ASD (Ampere per Square Decimeter) with 50% duty cycle, and reverse pulse current density 16 ASD with 2.5% duty cycle. [ABSTRACT FROM AUTHOR]