An Efficient Ash Cleaning Method for Flat Box Cartridge Filter: Structure, Parameters and Cleaning Mechanism of Slotted Blowing.

The problem of serious ash accumulation at the lower part of flat box filter cartridges is an important limitation for the improvement of ash cleaning efficiency in this kind of filter. To solve the above-mentioned problem, the type of slotted blowing hole impacting the performance of the ash removing under the same ash cleaning area was studied. In the present work, a total of four types of slotted blowing holes with different length were designed. The influence of blowing distance and blowing pressure on dust removal performance were investigated. Numerical simulation was conducted to demonstrate the mechanism of the dust removal process. An industrial coating test was also carried out to investigate and verify the actual ash cleaning performance under the optimal conditions as obtained from the above investigations. The results showed that: (1) the performance of dust cleaning produced by a three-slit blowhole was better than that by a four-slit blowhole; (2) 0.2 MPa was determined to be the optimal blowing pressure, which meets the requirement of ash cleaning; (3) 20 mm was selected as the optimal blowing distance, as this was the distance at which the surface side wall pressure at the non-positive-to-blow hole area was obviously increased, indicating that the whole performance of ash cleaning could be improved. The results obtained in this study are of great significance for improving the efficiency of dust removal in the use of flat box filters, promoting the development of dust removal technology, protection of environment, and reduction of human health damage. [ABSTRACT FROM AUTHOR]