An Asymmetric Beamforming Method Based on Arithmetic Phase Difference Weighting in CSAMT.

Traditional controlled-source audio-frequency magnetotellurics (CSAMT) radiates symmetric beams using a grounded symmetric dipole (GSD). Only a tiny fraction of radiant energy is taken advantage of during the far-field (Ff) observation due to the low directivity of the GSD. In order to enhance the signal-to-noise ratio (SNR) during the Ff observation, it is necessary to reduce the transceiving distance (TD) or increase the transmitting power (TP), but both methods will cause many problems. Further, when using the tensor method for observation, GSDs in two vertical directions will be employed to radiate energy, and then a series of problems will occur such as an asymmetry of the SNR in two vertical directions if the geological conditions under the two GSDs vary widely. An arithmetic phase difference (APd) weighting asymmetric beamforming method (ABFM) in CSAMT is proposed in this paper, which uses a GSD array instead of a single GSD, and a signal with APd is transmitted to control the wavefront for beam steering. A significant enhancement (about 3 dB) of the SNR will occur by collecting the radiant energy in the region of concern (RoC) using ABFM. The analysis and simulation results demonstrate that under the premise of the same TD and TP, the ABFM has obvious advantages in improving energy utilization in CSAMT. In other words, the APd-weighted ABFM can deal with a complex noise environment in the field better than the traditional method. [ABSTRACT FROM AUTHOR]