Sulfate resistance of Portland-Limestone cement mortars cured at 20 °C and 60 °C.

This study investigated the impact of different cuing history on the sulfate resistance of Portland-Limestone cement (PLC). Mortars of Portland cement (PC) and PLC with different dosages of limestone, 10%, 20%, 30% by mass, were cured in water at 20 °C and 60 °C for 28 days before immersed in Na₂SO₄ solution 50 g/L at 20 °C for sulfate resistance test. In addition to monitoring the length and mass changes of mortars, MIP and XRD were used to investigate microstructure and evolution of phase assemblages. Results show that PLC mortars cured at 20 °C give a poorer sulfate resistance than PC, the higher the limestone dosages in PLC, the worse sulfate resistance of the mortar. However, it is contrary for mortars cured at 60 °C. PLC shows a much better sulfate resistance than PC, and the higher the limestone dosages, the better sulfate resistance of the PLC mortars. The incorporation of limestone in PLC at dosages of 10–30% leads to the increase of carboaluminates content and the deterioration of pore structure, which is the main factor responsible for worsening the sulfate resistance of PLC mortars cured at 20 °C. When cured at 60 °C, the reduction of available aluminate caused by the dilution effect of limestone improves the sulfate resistance of PLC mortars. The formation of gypsum is not the main cause of the expansion. [ABSTRACT FROM AUTHOR]