The Effect of Sodium Tetrafluoroborate on the Properties of Conversion Coatings Formed on the AZ91D Magnesium Alloy by Plasma Electrolytic Oxidation.

Magnesium and its alloys are widely used in many areas because of their light weight, excellent dimensional stability, and high strength-to-weight ratio. However, the material exhibits poor wear and corrosion resistance, which limits its use. Plasma electrolytic oxidation (PEO) is an effective surface modification method for producing ceramic oxide layers on Mg and their alloys. The influence of the additions of sodium tetrafluoroborate (NaBF₄) and sodium fluoride (NaF) into alkaline-silicate electrolyte on the properties of the conversion layers formed in the magnesium AZ91D alloy has been investigated. Surface morphology and chemical composition were determined by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The anticorrosive properties of the layers were evaluated by electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization (PDP) methods in simulated body fluid (SBF). The presence of NaBF₄ or NaF in the electrolyte increases the corrosion resistance of the protective layer. However, the best anticorrosive properties show the layers obtained in the presence of NaBF₄. This is probably caused by the incorporation of boron and fluorine in the form of Mg (BF₄)₂ mainly in the barrier layer. [ABSTRACT FROM AUTHOR]