Effects of Wet Fermented Soybean Dregs on Physical and Mechanical Properties of Pellets of Corn Stover.

Simple Summary: Corn stover pellets are of poor quality (regarding physical and mechanical properties), and wet soybean dregs are viscous, which may improve the pelleting process. Furthermore, the soybean dregs have high nutritional value, which may increase the quality of feed. The relaxed density, dimensional stability coefficient and hardness of feed pellets were measured and analyzed in this study to clarify the influence mechanism of wet-fermented soybean dregs on the pelleting of corn stover. The results showed that fermented soybean dregs had a significant effect on corn stover pelleting. The comprehensive analysis showed that the addition of 5–10% fermented soybean dregs to corn stover improved the relaxed density, dimensional stability coefficient, and hardness of feed pellets by 10.76–23.51%, 7.32–15.74%, and 33.39–454.47%, respectively. The results could provide guidance on the research and development of high-quality forming technology and instruments using the mixture of corn stover and fermented soybean dregs and offer a new route for the utilization of high-moisture materials. Pelleting experiments were carried out in this study to clarify the influence mechanism of wet-fermented soybean dregs on the forming of corn stover. The effects of addition of water or wet fermented soybean dregs on the forming quality of corn stover were comparatively studied under different corn stover particle sizes and compression displacement. The fermented soybean dregs significantly affected the relaxed density, dimensional stability coefficient, and hardness of feed pellets. The relaxed density, dimensional stability coefficient, and hardness of feed pellets increased first and then decreased with the increase of fermented soybean dregs. The forming quality of corn stover added with fermented soybean dregs was higher than that of corn stover added with the same amount of water. The mechanism allowed soybean dregs to strengthen the bonding between corn stover particles and thus improved the quality of feed pellets. A certain amount of water was favorable for corn stover pelleting, but excessive water may decrease the quality of pellets. The comprehensive analysis showed that the addition of 5–10% fermented soybean dregs to the corn stover improved the relaxed density, dimensional stability coefficient, and hardness of feed pellets by 10.76–23.51%, 7.32–15.74%, and 33.39–454.47%, respectively. [ABSTRACT FROM AUTHOR]