Effects of Pulsed Magnetic Field Melt Treatment on Grain Refinement of Al-Si-Mg-Cu-Ni Alloy Direct-Chill Casting Billet.

Al-Si-Mg-Cu-Ni alloy is widely used in the manufacture of high-performance car engine parts. Coarse, dendritic α-Al and large primary Si are common in Al-Si-Mg-Cu-Ni alloy DC casting billet, which is harmful to the performance of the final product. In this paper, a pulsed magnetic field melt treatment technique was applied to the melt in the launder of a DC casting platform to modify the α-Al and primary Si in the billet. A transient numerical model was established to analyze the electromagnetic field, flow field and temperature field in the melt during the pulsed magnetic field treatment. The effect of the magnetic energy on the clusters in the melt was analyzed. We found that during the pulsed magnetic field melt treatment, the number of clusters close to the critical size was increased due to the cluster formation work being reduced by the magnetic energy, which facilitated nucleation and refined the solidification structure. Furthermore, the flow velocity increased, and temperature homogenized in the melt during the pulsed magnetic field melt treatment, which benefitted the clusters close to the critical size distributed and maintained in the melt uniformly. The experimental results show that the α-Al and primary Si were small and homogeneous following the pulsed magnetic field melt treatment. The size of α-Al and primary Si was reduced by 25.6–44.4% and 32.2–54.1%, respectively, in the billet center compared to the conventional process. [ABSTRACT FROM AUTHOR]