SRAM-Based In-Memory Computing Macro Featuring Voltage-Mode Accumulator and Row-by-Row ADC for Processing Neural Networks.

This paper presents a mixed-signal SRAM-based in-memory computing (IMC) macro for processing binarized neural networks. The IMC macro consists of $128\times 128$ (16K) SRAM-based bitcells. Each bitcell consists of a standard 6T SRAM bitcell, an XNOR-based binary multiplier, and a pseudo-differential voltage-mode driver (i.e., an accumulator unit). Multiply-and-accumulate (MAC) operations between 64 pairs of inputs and weights (stored in the first 64 SRAM bitcells) are performed in 128 rows of the macro, all in parallel. A weight-stationary architecture, which minimizes off-chip memory accesses, effectively reduces energy-hungry data communications. A row-by-row analog-to-digital converter (ADC) based on 32 replica bitcells and a sense amplifier reduces the ADC area overhead and compensates for nonlinearity and variation. The ADC converts the MAC result from each row to an N-bit digital output taking 2N-1 cycles per conversion by sweeping the reference level of 32 replica bitcells. The remaining 32 replica bitcells in the row are utilized for offset calibration. In addition, this paper presents a pseudo-differential voltage-mode accumulator to address issues in the current-mode or single-ended voltage-mode accumulator. A test chip including a 16Kbit SRAM IMC bitcell array is fabricated using a 65nm CMOS technology. The measured energy- and area-efficiency is 741-87TOPS/W with 1-5bit ADC at 0.5V supply and 3.97TOPS/mm2, respectively. [ABSTRACT FROM AUTHOR]