Structure Fabrication on Silicon at Atomic and Close-To-Atomic Scale Using Atomic Force Microscopy: Implications for Nanopatterning and Nanodevice Fabrication.

In this paper, the atomic-scale structure fabrication on Si (100) substrate using atomic force microscopy (AFM) with the aid of electrochemical and mechanical processes in a humid environment and under ambient conditions is studied. The local oxidation patterns are formed using platinum-coated tips with the aid of bias applied to the tip-substrate junction, and direct removal has been achieved using single crystal diamond tips, enabling the structure fabrication at the atomic and close-to-atomic scale. The depth and height of the etched trenches reached about 1 nm, which provides an approach for the fabrication of atomic-scale electrodes for molecular device development. Furthermore, material removal close to about three silicon atoms (~3.2 Å) has been achieved. This is important in molecular device fabrication. A detailed comparison among the nanopatterns and the material removal over bare and hydrofluoric acid (HF) treated silicon substrates is provided. This comparison is useful for the application of fabricating atomic-scale electrodes needed for the molecular electronic components. A deep understanding of atomic-scale material removal can be pushed to fabricate a single atomic protrusion by removing the neighbouring atoms so that the molecule can be attached to a single atom, thereby the AFM tip and Si substrate could act as the electrodes and the molecule between them as the channel, providing basic transistor actions in a molecular transistor design. In this paper, platinum-coated and single-crystal diamond tips are used to explain the oxide formations and direct material removal, respectively. [ABSTRACT FROM AUTHOR]