Manufacturable casting parts design with topology optimization of structural assemblies.

This paper presents a design method for manufacturable casting parts based on topology optimization of structural assemblies, which considers the geometry requirement and the manufacturing constraint of die-set material cost. The problem formulation follows the previous work presented in multi-component topology optimization for stamped sheet metal assemblies (MTO-S). Based on the vector method combined with Heaviside function, the moldability constraints for casting parts is formulated. As the base structure of component is easily misidentified as an undercut structure by the moldability constraints in the structural assemblies, the component baseline is proposed to realize the automatic filtering of the "fake" undercut structures which can be extended to the parting line to obtain the form of two-mold design. Several numerical examples on compliance minimization of single-mold and two-mold casting parts are conducted to verify the validity of the proposed method. The optimized results show that there is no interior void for each component and the component manufacturability has been improved obviously. The setting of minimum-area bounding box (MABB) area constraint limits and the number of components will have a significant effect on the performance of the optimized structure. Users can achieve the desirable solution based on their actual demand by making trade-offs between the structural performance and manufacturing cost. [ABSTRACT FROM AUTHOR]