Experimental study on machining properties of a high-strength composite material with Ti-555 titanium alloy matrix.

Targeted at a composite material with a novel Ti-555 high-strength titanium alloy matrix developed using the method of "reinforcement wet grinding-spark plasma sintering-heat treatment", a study is conducted on the machining performance during the machining process. Orthogonal experiment method, single factor experiment comparison method and empirical model analysis method are adopted to explore the pattern of changes in cutting force, surface roughness and the wearing of cutting tools under different parameters. There are a number of points revealed by the experimental results as follows. In the machining process, due to the high-strength and hardness of the composite material with Ti-555 high-strength titanium alloy matrix, the selection of machining parameters is limited, and the highest machining speed reaches up to merely 45 m/min. Most affected by the depth of machining, the cutting force increases as machining depth and feed rate are on the rise. The empirical model of cutting force is constructed using the least square regression method, the level of significance is high as indicated by the F test method. and feed rate will make difference to surface roughness. Not only will a greater feed rate increase roughness value, it will also aggravate the wearing of the tool. [ABSTRACT FROM AUTHOR]