The Deformation Characteristics and Lateral Stress of Roadside Crushed Rocks with Different Particles in Non-Pillar Coal Mining.

Gob-side entry retaining formed by roof fracturing (GERRF) is a popular non-pillar mining method. The method uses crushed rocks in gob side to support and control the movements of the gob roof. These crushed rocks will deform under roof pressure and generate desirable lateral stress on support structures of gangue rib. In this study, the deformation behavior of crushed mudstones with different particle sizes under incremental loading was investigated with an innovative experimental device that simulated boundary conditions of the GERRF method. Influence of particle size of the crushed mudstones to the generation of lateral stress applied on support structures were concurrently observed and analyzed. Research outputs from the tests showed that: (1) The particle size exerted a significant influence on the accumulated axial deformation, period axial deformation, and lateral stress applied on support structure of crushed rocks. (2) Under the same axial stress, the larger the particle size, the smaller the accumulated axial deformation of the crushed rock; A skeletal loading-bearing effect was apparent in the rock samples with larger particles (S-2, S-3). The compressive deformation process of samples S-2, S-3 divided into structural adjustment, skeletal load-bearing and crushing cum filling phases. At skeletal loading-bearing phase, the crushed rocks showed better deformation resistance and stability than other phases; (3) Two types of periodic stress-strain curves were observed for crushed mudstones in the tests. The "down-concave" type implied the deformation for the crushed mudstones was primarily a consequence of the compression in the void spaces. While the "upper-convex" type curve was resulted in particle crushing cum filling again; (4) The lateral pressure generated by large-size samples was smaller than that of small-size samples. Additionally, a poor regularity of lateral stress was observed in compression test of large-size sample (S-3). The relationship between the axial stress and lateral stress generated on the support structure was found to be approximately linear relationship under the condition that lateral pressure shows good regularity. [ABSTRACT FROM AUTHOR]