ORC Optimal Design through Clusterization for Waste Heat Recovery in Anaerobic Digestion Plants.

Waste heat recovery (WHR) systems through organic rankine cycles (ORCs) in anaerobic digestion plants may improve cogeneration efficiency. Cogeneration unit power output, flue gas temperature, and mass flow rate are not constant during the day, and the thermal load requested by digesters shows seasonal variations. For this reason, a proper design of the ORC is required. In this study, a design methodology is proposed, based on the clustering of the boundary conditions expected during one year of operation and the anaerobic digestion plant operation. The design has to be a compromise between part-load operation and nominal power rating. In this study, the ORC design boundary conditions were partitioned into four representative clusters with a different population, and the centroid of each cluster was assumed as a potential representative boundary condition for the cycle design. Four different ORC designs, one for each cluster, were defined through an optimization problem that maximized the cycle net power output. ORC designs were compared to those resulting from the seasonal average boundary conditions. The comparison was made based on the ORC off-design performance. Part-load behavior was estimated by implementing a sliding-pressure control strategy and the annual production was therefore calculated. ORC off-design was studied through a detailed Aspen HYSYS simulation. Simulations showed that the power output of each design was directly connected to the cluster population. The design obtained from the most populated cluster generated 10% more energy than that from a system designed by taking into account only the year average conditions. [ABSTRACT FROM AUTHOR]