Active Radiative Liquid Lithium Divertor for Handling Transient High Heat Flux Events.

The extreme heat flux anticipated in fusion reactor divertor plasma facing components (PFCs) is perhaps the most challenging technology issue for fusion energy development. Most divertor PFCs are designed based on the maximum steady-state operational limits. Application of lithium (Li) in NSTX resulted in improved H-mode confinement, H-mode power threshold reduction, and reduction in the divertor peak heat flux while maintaining essentially Li-free core plasma operation even during H-modes. These promising Li results in NSTX and related modeling calculations motivated the passive and active radiative liquid lithium divertor concepts (RLLD and ARLLD) (Ono et al. in Nucl Fusion 53:113030, 2013; Fusion Eng Des 89:2838, 2014). This radiative process has the desired effect of spreading the localized divertor heat load to the rest of the divertor chamber wall surfaces, facilitating divertor heat removal with relatively small amount of lithium ~ few moles/s to handle the expected steady-state high divertor heat load. However, in addition to the high steady-state heat flux, the fusion reactor divertor PFCs could also experience significant transient heat flux such as ELMs and/or other magnetic reconnection events which can deposit large transient heat flux onto the divertor PFCs. If unprotected, it could damage the divertor PFC surfaces which could lead to a highly undesirable unplanned shutdown for PFC repair and/or replacement. In this paper, we explore feasibility of LLD and ARLLD concepts in handling such transient heat flux to protect the divertor PFCs from the extreme transient heat flux while maintaining the normal plasma operations. We also suggest a possible implementation technique using inductive pellet injector for the reactor PFC protection from transient heat flux which can be tested on NSTX-U. [ABSTRACT FROM AUTHOR]