Minimising direct‐coupled distributed synchronous generators impact on electric power systems protection.

This study presents a method to place, size, coordinate and adequate protection systems in distribution networks (DNs) with directly‐coupled distributed generation (DG). DG penetration increase in DNs is beneficial to the operation of these grids. However, since the majority of DN is already consolidated, with protective devices sized for certain current levels and directionality, adding DG to these systems may cause issues. This study introduces a method to determine protective devices placement, their coordination and sizing, depending on DG location. Direct‐coupled DG is considered since DG connected to DNs through power electronics limit the fault current to the network. Firstly, recloser allocation is treated in a multiobjective approach, reducing reliability indices. To solve this problem, particle swarm optimization is applied. Fuse cutouts allocation is determined by a set of rules, developed considering feeder particularities. After, DG is considered and its effects on the protection coordination are evaluated. To adapt DN to receive DG, fault current limiters are placed to avoid recloser – fuse miscoordination. Finally, recloser operation is analyzed to determine the operational philosophy to avoid misoperation in the presence of DG. Graphical and numerical results are presented for test systems to show the functionality and performance of the proposed method. [ABSTRACT FROM AUTHOR]