Effect of microalloying with transition and post-transition metals on the aging of precipitation-hardened Al–Cu alloys.

An effective alloying system for providing improved mechanical and technological properties of model cast Al–Cu alloys (Al-4.6%Cu-0.4%Mn-0.2%Ti), using magnetohydrodynamic (MHD) melt mixing, has been chosen in this research. It was shown that MHD treatment provides a non-dendritic (globular) ingot structure and can be applied to ensure thixotropy in the mass production of high-precision cast parts. Small additives of alloying elements that modify both grain structure (Mn, Zr) and reinforcing phases (Sn, In, Sc) were used. It is shown that the most effective alloying elements which improved the strength characteristics of the alloy are Sn and In. The introduction of 0.1–0.2% Sn or In followed by heat treatment led to a 50% increase in its yield strength, a 15% increase in the tensile strength. Sn and In modified the decomposition kinetics, providing a high density of precipitate and slow coalescence of nano-sized particles of the strengthening θ′-phase, which resulted in higher strength characteristics of the alloy. [ABSTRACT FROM AUTHOR]