Formaldehyde total column densities over Mexico City: comparison between MAX-DOAS and solar absorption FTIR measurements.

Formaldehyde (HCHO) total column densities over the Mexico City Metropolitan Area (MCMA) were retrieved using two independent measurement techniques: Multi Axis - Differential Optical Absorption Spectroscopy (MAX-DOAS) and Fourier Transform Infrared (FTIR) Spectroscopy. For the MAX-DOAS measurements, the software QDOAS was used to calculate differential Slant Column Densities (dSCDs) from the measured spectra and subsequently the Mexican MAX-DOAS Fit retrieval code (MMF) to convert from dSCDs to Vertical Column Densities (VCDs). The direct-solar absorption spectra measured with FTIR were analyzed using the PROFFIT retrieval code. Typically the MAX-DOAS instrument reports higher VCDs than those measured with FTIR, in part due to differences found in the ground-level sensitivities as revealed from the retrieval diagnostics from both instruments. Three MAX-DOAS datasets using measurements conducted towards the east, west or both sides of the measurement plane were evaluated with respect to the FTIR results. The retrieved MAX-DOAS HCHO VCDs where 5 %, 9 % and 28 % larger than the FTIR which, supported with satellite data, could demonstrate a large horizontal inhomogeneity in the HCHO abundances. A time-dependent comparison revealed that the vertical distribution of this pollutant, guided by the evolution of the mixing layer height, can play an important role in how the results are affected. Apart from the reported seasonal and diurnal variability of HCHO columns within the urban site, background data from measurements at a high-altitude station, located only 60 km away are presented. [ABSTRACT FROM AUTHOR]