Droplet Deposition and Control of Planthoppers of Different Nozzles in Two-Stage Rice with a Quadrotor Unmanned Aerial Vehicle.

Previous studies have confirmed that choosing nozzles that produce coarser droplets could reduce the risk of pesticide spray drift, but this conclusion is based on a large volume of application, and it is easy to ignore how this impacts the control effect. The difference from the conventional spray is that the carrier volume of Unmanned Aerial Vehicle (UAV) is very limited. Little was known about how to choose suitable nozzles with UAV's limited volume to ensure appropriate pest control. Droplet deposition with the addition of adjuvant and the LU110-010, LU110-015, and LU110-020 nozzles and control of planthoppers within nozzles treatments were studied by a quadrotor UAV in rice (Tillering and Flowering stages). Allura Red (10 g/L) was used as a tracer and Kromekote cards were used to collect droplet deposits. The results indicate that the density of the droplets covered by the LU110-01 nozzle is well above other treatments, while the differences in droplet deposition and coverage are not significant. The deposition and coverage were improved with the addition of adjuvant, especially in LU110-01 nozzles' treatment. The control effects of rice planthoppers treated by LU110-01 nozzle were 89.4% and 90.8% respectively, which were much higher than 67.6% and 58.5% of LU110-020 nozzle at 7 days in the Tillering and Flowering stage. The results suggest that selecting a nozzle with a small atomizing particle size for UAV could improve the control effect of planthoppers. [ABSTRACT FROM AUTHOR]