Model Study on Burden Distribution in COREX Melter Gasifier.

COREX is one of the commercialized smelting reduction ironmaking processes. It mainly includes two reactors, i.e., a (reduction) shaft furnace (SF) and a melter gasifier (MG). In comparison with the conventional blast furnace (BF), the COREX MG is not only equipped with a more complicated top charging system consisting of one gimbal distributor for coal and eight flap distributors for direct reduction iron (DRI), but also the growth mechanism of its burden pile is in a developing phase, rather than that in a fully-developed phase in a BF. Since the distribution of charged burden plays a crucial role in determining the gas flow and thus in achieving a stable operation, it is of considerable importance to investigate the burden distribution influenced by the charging system of COREX MG. In the present work, a mathematical model is developed for predicting the burden distribution in terms of burden layer structure and radial ore/coal ratio within the COREX MG. Based on the burden pile width measured in the previous physical experiments at different ring radii on a horizontal flat surface, a new growth mechanism of burden pile is proposed. The validity of the model is demonstrated by comparing the simulated burden layer structure with the corresponding results obtained by physical experiments. Furthermore, the usefulness of the mathematical model is illustrated by performing a set of simulation cases under various charging matrixes. It is hoped that the model can be used as a what-if tool in practice for the COREX operator to gain a better understanding of burden distribution in the COREX MG. [ABSTRACT FROM AUTHOR]