Long-term evolution of spherical shell with boron carbide layer after explosive compression.

Predictive simulation of the long-term response of multilayer targets with ceramics layers to shock compression demands appropriate material models. Because ceramics are complex brittle materials, which tend to lose their strength under heavy loads, such simulation requires the failure models well-proven for a wide range of strains and strain rates. Standard plate impact experiments provide the main data utilized for developing and validating the mechanical models of material response to shock compression. However, apart from the fact that such experimental data are inherently one-dimensional, they can be insufficient to verify the failure model at relatively low strain rates typical for long unloading waves. Here, we present the experimental results for explosive compression of a spherical multilayer shell initiated by a single detonator. The explosive-coated shell consists of the nested spherical layers: the outer made of boron carbide and the inner of lead. X-ray images showing the evolution of those layers after detonation are then compared with simulation results. Propagation of the compression wave through the layers resulting in ceramics damage is analyzed in detail. We demonstrate that the failure model of boron carbide should be adjusted for compressions below 10 GPa to achieve a good agreement with our experimental images. Such an improved failure model provides the predictive simulation of long-term dynamics of targets after unloading, and it has almost no effect on wave profiles after plate impact. [ABSTRACT FROM AUTHOR]