Regional scale prospecting for non-sulphide zinc deposits using ASTER data and different spectral processing methods.

The Ravar-Kuhbanan-Bahabad belt (RKBB) in Central Iran contains several carbonate-hosted non-sulphide Zn (zinc)-Pb (lead) deposits. The Gujer Zn mine area located in the middle of the RKBB was selected as the case study. Due to its large extent, dolomitic envelope in carbonate host rocks can be considered as a more appropriate exploratory target than small Zn-rich gossans or blind karst filling ore. Based on previous studies, the occurrence of red sandstone as a candidate of supplying metal for mineralization and evaporate as sulphate source for mineralized liquids in the vicinity of carbonate rocks can be important exploratory key in the RKBB. Non-sulphide Zn deposits were formed through oxidation of primary Mississippi Valley-type (MVT) deposits in the study area. Remote sensing studies were undertaken using visible to near-infrared (VNIR) and shortwave infrared (SWIR) bands of the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) with the objective of lithological mapping. Five traverse lines containing a total of 81 samples were designed and followed with subsequent chemical analysis, thin section studies, and spectroscopy to verify the results. Two types of carbonates, namely, magnesian dolomite as host rock and surrounding calcitic limestone, were realized through using magnesium oxide (MgO) to calcium oxide (CaO) ratio. Based on spectroscopy studies, calcite and dolomite showed distinct absorption features at 2.35 µm and 2.32 µm, respectively, in ASTER band 8 while a shoulder at 2.25 µm was seen in ASTER band 7 for dolomite. Three image processing methods including spectral angle mapper (SAM), linear spectral unmixing (LSU), and mixture-tuned matched-filtering (MTMF) were applied to separate dolomite and limestone. The accuracy of image classification was numerically estimated using a confusion matrix. Limestone with the accuracy of 95.83% was more precisely enhanced using MTMF method compared to SAM and LSU methods. Highest accuracy of 75% for dolomite was obtained through using LSU method. Red sandstone and evaporate units were classified using MTMF and SAM/LSU methods, respectively. Rock units with the highest accuracy were selected and simply overlain on an image of ASTER in a GIS platform to create the potential map of the study area. Results showed that ASTER data can be successfully used to prepare a potential map for regional scale prospecting for carbonate-hosted non-sulphide Zn-Pb deposits in geological setting and climate condition similar to the RKBB. [ABSTRACT FROM AUTHOR]