The Design of Real-Time Communication System Based on RFM and MRG Real Time for EAST.

For the purpose of keeping a plasma in steady state and avoiding instabilities, the experimental advanced superconducting tokamak (EAST) plasma control system (PCS) needs more diagnostic data produced by the EAST distributed subsystems to perform its complex control algorithms. To solve the transmission problem of all these data, a real-time communication system based on the messaging, real time, and grid real time operating system and reflective memory (RFM) network is designed. It is expected to enable the data acquisition (DAQ) systems of various EAST subsystems to be able to transfer the diagnostic data to the PCS in real time through the RFM network as the data are acquired. Then, the PCS can use these available data to carry out the necessary calculations according to the control algorithms and send the commands to the subsystems in every control cycle. To reach this goal, a small real-time communication system, adapted from the prototype of the EAST vacuum DAQ system (sampling rate of 10 KHz), was built for a performance test. In this test, the vacuum DAQ system transferred the acquired data to the PCS within the control cycle of $100~\mu \text{s}$ , which tentatively meets the abovementioned requirements. The test was performed for 1000 s to get a stable and reliable result, which is described in detail in this paper as well as plans for future work. [ABSTRACT FROM AUTHOR]