Direct Strength Method of Design for Channel Sections in Shear with Square and Circular Web Holes.

The direct strength method (DSM) design rules for cold-formed steel members in shear have been incorporated recently into the North American specification for the design of cold-formed steel structural members and are being implemented in the Australian cold-formed steel structures standard. The method, which was calibrated for unperforated members only, requires two inputs including the buckling load V_cr and the shear yielding load V_y. For members with square web cutouts, Vcr can be computed by either the spline finite strip method or the tabulated values based on the shear buckling coefficients k_v as in previous studies or the finite element method. However, V_y has not been accurately formulated including holes. This paper represents a practical model to obtain V_y for members with central openings subjected predominantly to shear. The model ranges from very small holes where traditional shear yielding predominates to large holes where Vierendeel action dominates. The model is verified with the DSM design formulas using the predominantly shear tests recently conducted at the University of Sydney and Queensland University of Technology with both square and circular web openings and for shear spans with aspect ratio of 1.0. [ABSTRACT FROM AUTHOR]