GEOMETRIC CALIBRATION OF ZIYUAN-3 THREE-LINE CAMERAS COMBINING GROUND CONTROL POINTS AND LINES.

Due to the large biases between the laboratory-calibrated values of the orientation parameters and their in-orbit true values, the initial direct georeferencing accuracy of the Ziyuan-3 (ZY-3) three-line camera (TLC) images can only reach the kilometre level. In this paper, a point-based geometric calibration model of the ZY-3 TLCs is firstly established by using the collinearity constraint, and then a line-based geometric calibration model is established by using the coplanarity constraint. With the help of both the point-based and the line-based models, a feasible in-orbit geometric calibration approach for the ZY-3 TLCs combining ground control points (GCPs) and ground control lines (GCLs) is presented. Experimental results show that like GCPs, GCLs can also provide effective ground control information for the geometric calibration of the ZY-3 TLCs. The calibration accuracy of the look angles of charge-coupled device (CCD) detectors achieved by using the presented approach reached up to about 1.0''. After the geometric calibration, the direct georeferencing accuracy of the ZY-3 TLC images without ground controls was significantly improved from the kilometre level to better than 11 m in planimetry and 9 m in height. A more satisfactory georeferencing accuracy of better than 3.5 m in planimetry and 3.0 m in height was achieved after the block adjustment with four GCPs. [ABSTRACT FROM AUTHOR]