Comparative study of a solid-phase extraction system coupled to capillary electrophoresis in the determination of haloacetic compounds in tap water.

This study compares four different commercial sorbents, LC-SAX (a quaternary ammonium anion exchanger), LiChrolut EN (a highly crosslinked styrene-divinylbenzene), Envi-Carb (a graphitized carbon black) and Oasis HLB [a macroporous poly(divinylbenzene-co-N-vinylpyrrolidone) copolymer], for the solid-phase extraction (SPE) of various haloacetic compounds from aqueous samples. The recoveries with the different sorbents were studied by coupling an off-line SPE system to capillary electrophoresis with indirect photometric detection. The recoveries were highest when LiChrolut EN was used. The limits of detection for the compounds are in the low microgram per litre range and the recovery values are over 80% for dichloroacetic acid and trichloroacetic acid, two of the most habitual haloacetic acids in chlorinated water, when 500 ml of standard solution was preconcentrated using this sorbent. Finally, the performance of the method with different water samples, the effect of chlorination in a treatment plant and the evolution of the haloacetic acids in the water distribution system were tested and the results were compared with those obtained using liquid-liquid extraction and gas chromatography-mass spectrometry.