Physico-chemical and toxicologo-hygienic aspects of using ethylene oxide for the sterilization of medical appliances. Part I. Sorption and diffusion of ethylene oxide in polymeric materials.

Sorption ability of polymeric materials for medical purposes was studied with respect to the sterilizing gas - ethylene oxide - at 23, 35 and 55 degrees C. Sorption coefficients of ethylene oxide (EO) for the materials under study were calculated on the basis of results. Investigation of the kinetics of desorption of EO from the polymeric materials for medical purposes has shown that its content changes exponentially depending on the time of degassing. However, the lines in the 1g Q/Q0 - tau coordinates show a sharp break which testifies to a change in the mechanism of the process determining the character of the mentioned dependence. In the first region, corresponding to high concentrations and short periods of time, the determining process is diffusion while in the second region (low concentrations, long time intervals) - it is desorption of EO molecules most firmly bound to the polymer. Diffusion coefficients were calculated for the first region. The possibility of predicting the time periods of removing ethylene oxide from the polymeric materials was demonstrated for both stages on the basis of calculated diffusion coefficients and kinetic curves of degassing. Recommendations were given for the use of polymers for medical appliances and apparatuses.