Occupational exposure to chrysotile in an asbestos cement factory in Kyrgyzstan.

Objectives: An increasing number of countries are banning the production and use of asbestos, in compliance with the ratification of the C162 Asbestos Convention and the Basel Convention, and in response to the call for its elimination in the ILO resolution and WHO reports on the health risks associated with asbestos. Nevertheless, several countries, including Kyrgyzstan, are still miners and/or manufacturers of asbestos. The main objective of the study is to assess the occupational exposure to chrysotile of workers engaged in a production facility of asbestos-cement products in Kyrgyzstan.
Methods: Monitored workers (n = 16, for a total of n = 18 samples) were divided into 3 "Similar Exposure Groups" (SEGs; SEG-1: asbestos loading; SEG-2; asbestos-cement mixing; SEG-3: cutting of asbestos-cement sheets) according to EN 689 standard. Samples were collected through personal sampling and subsequently examined by means of scanning electron microscope equipped with an energy-dispersive spectrometer for the compositional analysis of each fibre. The numerical concentration of airborne asbestos fibres was henceforward determined by dividing the number of fibres and the volume of sampled air (expressed in the number of fibres per millilitre of air: ff/ml).
Results: Investigated workers resulted to be exposed to chrysotile fibres. Results (GM ± GSD) outlined extremely high exposure levels for SEG-1 (2.2 ± 2.1 ff/ml) and SEG-3 (4.7 ± 1.6 ff/ml) workers and lower-but still relevant-exposure values for SEG-2 (0.91 ± 2.6 ff/ml) workers.
Conclusions: The results obtained in this case study can help to document potentially critical situations of occupational exposure to asbestos that can still occur nowadays in low and middle-income countries where asbestos is still mined and processed.
(© The Author(s) 2024. Published by Oxford University Press on behalf of the British Occupational Hygiene Society. All rights reserved. For commercial re-use, please contact reprints@oup.com for reprints and translation rights for reprints. All other permissions can be obtained through our RightsLink service via the Permissions link on the article page on our site—for further information please contact journals.permissions@oup.com.)