Experimental and Numerical Investigation of Dynamic Damage and Load Transfer of PBX Substitute Material under Low Velocity Impact.

The accidental initiation of explosives under mechanical loads has caused numerous catastrophic events. Therefore, the dynamic damage behavior of confined polymer-bonded explosives (PBXs) must be assessed to improve their practical applicability. In this study, polymer-bonded sugar (PBS) materials were prepared using a novel agglomerate to develop a PBX substitute material with enhanced experimental safety. The mechanical properties of the PBS shell were evaluated using a dynamic compression test, which revealed that the compression response of the shell was affected by the strain rate. A low-velocity impact experiment was performed to investigate the dynamic damage and load transfer characteristics of the PBX substitute. A constitutive model was developed to characterize the mechanical response of PBS subjected to high strain rates, and implementing this model in ABAQUS ensured successful prediction of the damage evolution process associated with PBS. Simulation results indicated that the PBS specimen was primarily damaged around its center while sliding friction was dominant near the center during pressure application. Notably, different stress states result in distinct crack growth velocity histories along the axial direction, with the damage ratio progressively decreasing toward regions closer to the impact surface.